Vinyl Fence Installation Tips: Attaching the Gate
Lowe’s home improvement expert, Mike Kraft, shows how to install a vinyl gate when building a new fence. First, measure the clearance for the gate and hinges. Lay a wooden board on the ground to mark where the gate will be, and then mark the position of the next post. Dig the hole and set the post inside. After filling with concrete, it is time to install the gate hardware. Make sure to attach all gate hinges before hanging the actual vinyl gate. Once the hardware is in place, set the gate on wood blocks to the desired height. To finish off the gate, screw in the hinges, handle and latch lever. The only steps remaining in the fence installation process is adding vinyl fence post caps. Simply insert vinyl cement inside the post cap and place on top of your fence posts. To learn more about fencing installation and to find the printable instructions for this video, visit www.Lowes.com
Antique Wrought Iron Hoop & Finial Fence 2 Sections and Gate Pick up Maryland
 | US $145.00 (0 Bid) End Date: Wednesday Mar-28-2012 3:21:56 PDT Bid now | Add to watch list |
Where did you find the offset gate hinges??? Lowe’s does not have them. Now I have a fence centered on the posts, but the gate will have to be flush, because you don’t sell what you show! And by the way, every post hardware bag is short 8 screws. You will need to but more at (5.00$ +, per bag) because you will be short. They give you 24, but you need 32 screws per post.
what good is a fence with holes under it? Aren’t there better ways? How much more expensive is block?
looks like poop. hop they arent keeping dogs in
thanks!