Archive for Window Xp Repair

Kernel32.dll is a Windows kernel file that manages memory functions, interrupts and I/O operations. To protect its memory space from being occupied by other programs, this file is loaded in a protected memory space whenever you start the computer. At times, the file might get damaged resulting into unexpected system behavior or an unbootable system. Such issues are generally indicated through BSOD at startup. These screens show the description of the error occurred. However, to isolate such problems, you might need to completely reinstall your operating system. It causes data loss if you store important files on primary partition or haven’t partitioned the drive. You will need to use a professional data recovery program if you find your data backup incompetent to restore the lost files and folders.

For an instance, consider that you use a Windows XP based computer. You boot the computer and the process fails displaying the below BSOD:

STOP: C00000139 (Entry Point Not Found)
The procedure entry point FlSSEtvalue could not be located in the dynamic link library KERNEL32.dll.”

You cannot access the stored data after you receive this error message.

Cause

Such error might root from corruption of kernel32.dll damage.

Solution

You are recommended to follow these steps in order to solve the existing behavior:

  • Boot the computer by using Windows XP installation disc to start Windows Recovery Console. To do so, you will need to change the boot sequence to start the system from boot disc and not from hard drive

  • At ‘Welcome to Setup’ screen, press Enter to start the Windows Setup

  • Accept the license agreement

  • Choose the Windows installation that you need to repair and press ‘R’ to start repair process

  • The above step will copy the necessary system files to the existing Windows installation

If the above steps succeed, you will be able to boot your system or otherwise, you will need to reinstall Windows XP. You should use your last backup after the re installation process is done. But in case, backup doesn’t work successfully, use a proficient data recovery software to extract the data thus lost. Data Recovery utilities are powerful tools designed to perform complete retrieval of data while maintaining its integrity. You can use these tools as comprehensive partition recovery tools.

Stellar Phoenix Windows Data Recovery is a fully-competent to recover and restore lost data for Windows 7 RC1, Vista, XP, 2003 and 2000 based systems. It is a non-destructive data recovery software that provides you advanced options, such as RAW File Recovery, Drive Status, Disk Imaging and more. It supports FAT32, VFAT, NTFS and NTFS5 file systems.

Bury Shane PhotoAbout Author
Bury Shane is a data recovery expert doing research from last 6 years on partition recovery and data recovery software.
Categories : Window Xp Repair
Comments Comments Off
Jun
12

Recover Deleted Partition

Posted by: | Comments Comments Off

FAT files recovery software undelete missing corrupted data from ATA, SATA, IDE, SCSI, EIDE technology based hard drive. Windows FAT data rescue application salvage lost damaged songs, video clips, pictures and other important documents from overwritten or formatted VFAT, FAT12, FAT16 and FAT32 based hard disk partition. FAT partition data recovery software rescue lost files folders permanently deleted using SHIFT+DEL key or even removed from recycle bin. FAT32 data rescue application salvage missing files document even if windows operating system generate disk not formatted message. Windows FAT partition data salvage tool restore deleted documents from all branded USB or internal hard disk drive including Seagate, Samsung, Hitachi, Western Digital, Toshiba, HP, Maxtor, Sony, SimpleTech, Quantum and many others. FAT partition data rescue application provide interactive graphical user interface and help manual for easy and safe data recovery. FAT partition files rescue tool provide data recovery on various windows operating system including 98, ME, NT, 2000, 2003 server, XP and Vista.FAT partition data recovery software undelete lost corrupted data from VFAT, FAT 12, FAT 16 and FAT 32 file system based hard disk. File salvage application rescue deleted files and folders from logically crashed laptop hard drive. Windows FAT partition file undelete utility recover data lost due to virus attack or hardware malfunction. FAT32 data rescue tool recover missing files including JPEG, JPG, DOC, TXT, PNG, GIF, MP3, MPEG format.

Features:

  • Windows FAT partition data recovery application rescue lost files and folders permanently deleted using SHIFT+DEL key or even after emptied recycle bin.

  • Files recovery software rescue lost data document from formatted or overwritten Windows FAT partition.

  • FAT partition data salvage tool rescue missing deleted files from ATA, SATA, IDE, SCSI, EIDE based hard disk.

  • FAT files recovery tool is compatible with Windows 98, ME, NT, 2000, 2003 server, XP and Vista operating system.

  • File rescue software provides interactive graphical user interface and inbuilt user help manual for end user.

 

About Author
NTFS Partition Repair http://www.ntfspartitionrepair.com
Categories : Window Xp Repair
Comments Comments Off
Jun
12

Windows 7 Partition Lost after Hibernation

Posted by: | Comments Comments Off

Since the release of Windows 7, Microsoft has received many reports on data loss problems. Though the operating system has been designed with the fixes of most of the earlier existing problems, there are still some issues, which are unfixed and unresolved and can corrupt or delete your partition(s). Thus, a Windows 7 user needs to run a timely backup scheme to prevent any Windows Partition Recovery needs.

One realistic problem has been discussed further that truly depicts the existence of data loss in Windows 7. Suppose you as a Windows 7 user leave your system in hibernation mode. But after you return, you find the computer is still on and is hung on the BIOS screen. This is because Windows 7 computer looks for the boot partition but is unable to do so because of missing boot entry. Further, when you use Windows 7 install disc, it doesn’t work either and is unable to detect the partition.

In such cases, the user also reports that the partition gets renamed to ‘System Reserved’, but with no data. This is actually the Windows 7 created partition, which is created at the time of installation and is not the real partition that you lost.

Solution

For troubleshooting the problems discussed above, you need to perform Windows 7 startup repair by using Windows 7 install disc or system repair disc. The steps are as as follows:

Insert the Windows 7 install disc or system repair disc and boot your computer
Press any key when prompted to do so
Choose setup language and other settings
Click ‘Repair Your Computer’ option
Select the Windows installation you want to repair
Select the ‘Startup Repair’ option
Click ‘Finish’ to start Windows 7

Performing the above steps should resolve the Windows startup problems. You can try running commands like ‘fixmbr’ to solve the partition issues.

In worst cases, the above solutions might not work, compelling you to recreate the disk partitions and restore lost data from a previous backup. In case no proper data backup is available, the last resort is to use a Partition Recovery Software and retrieve all the lost data. Windows Partition Recovery software use high-end algorithms to extract lost partitions, irrespective of the cause of loss.

Stellar Phoenix Windows Data Recovery is a comprehensive application designed to recover lost, deleted, corrupted, or reformatted partitions. Compatible with Windows 7, Vista, XP, 2003, and 2000, this Partition Recovery Software is equipped with several advanced options along with an interactive user-interface.

About Author
Daisy a student of Mass Communication doing research on Partition recovery software. He is also a freelancer for http://www.partitionrecovery-software.com/window-ntfs-fat-recovery.php
Categories : Window Xp Repair
Comments Comments Off
Jun
12

Windows Troubleshooting – Online Help Most Convenient !!

Posted by: | Comments Comments Off

If you are looking for help on the up keep or repair of your Windows operating system, you would be well advised to take online help because it really makes for convenient as well as educative type of help. If you call a technician home or take your Windows PC to a repair shop, it will be both expensive as well as cumbersome. It is advisable to take the help of online technicians who offer remote support through phone or internet. Of course you need to ensure that they are the goods before subscribing to their annual plan for which they generally insist.

Their insistence is for your benefit really because they give unlimited Windows and/or PC troubleshooting for a one time payment. Online chat or email is used for providing this support and you can rest content about experts looking after your PC functioning. What you should look for in a company offering remote computer support is its credibility. The credibility of the company, its professionals, and the price charged for Windows support can be gauged by some indicators. The professional technicians should not only have certification from an unquestionably reputable company like Microsoft.

The company should have years of experience in dealing with Windows issues because then, any problem that a PC owner faces is already resolved several times by the technicians. Another factor is affordability of the support. The Windows troubleshooting done online or through phone should not be too expensive as that defeats the purpose of taking it. The best way out is to look a company giving unlimited online computer support for a fixed price and period of time. You will find companies giving unlimited support for a year at a price of around $100. This is great for those folks who are not very adept in using latest technology because they are likely to have lots of issues. Paying for online help for each support taken is likely to end all their savings.

If you take an online Windows troubleshooting service considering the factors mentioned above, you are most likely going to breathe easy about your PC’s maintenance or repair. The great thing about these services is that you are getting educated too. The next time the same problem arises, you know how to fix it. Online or remote Windows troubleshooting is most likely to outlive its utility for you after you have taken the support for a year. You will not need to pay for it the second time. You can also look at it as an educational expense for a PC maintenance course.

The Windows troubleshooting by professional technicians would become routine work for you as it should be. The usual PC maintenance like configuring firewall, installation of anti-virus, installing and running PC tune software, using disk defragmentation tool for fine-tuning your hard disk, checking internet options for the settings affecting speed of connection, removing clutter from the temp folder, etc. are not really expert jobs if you see them being done even once.

About Author
Sandy John works with Ask PC Experts an Computer Support Australia Company provide Remote PC Repair Australia Services. Contact Ask PC Experts for Online PC Support Australia , PC Troubleshooting Specialists & other computer related help.
Categories : Window Xp Repair
Comments Comments Off

An easy way to fix Windows Vista startup problems is to run ‘Startup Repair’. When Windows Vista fails at startup, it immediately launches ‘Startup Repair’, which then analyzes the startup logs and runs a series of diagnostic tests to determine the reason of failure. It looks for a range of startup problems, including corrupt disk metadata, incompatible or damaged device drivers, and lost or damaged startup configuration files. However, if Windows fails to start because of some problems that it cannot fix, ‘Startup Repair’ reports errors. These errors can give you a brief idea about procedures needed to be followed to Recover Windows Partition data. Following is an example that illustrates a similar type of situation.

Suppose you use a Windows Vista computer that unexpectedly stops working. You try to boot the computer, ‘Startup Repair’ starts but cannot complete operations. Additionally, it shows the below or similar error report about the failure:

StartupRepair V2

Problem Signature 1: AutoFailover

Problem Signature 2: Signature1

Problem Signature 3: Signature2

Problem Signature 4: Signature3

Problem Signature 5: CorruptFile

Problem Signature 6: CorruptFile

Problem Signature 7: Signature4

Problem Signature 8: Signature5

Problem Signature 9: SystemRestore

Problem Signature 10: 0

OS Version: 6.0.6000.2.0.0.256.1

Locale ID: Locale ID

This error report suggests ‘Startup Repair’ has been unable to fix Windows corruption.

Resolution

You can try the below mentioned solutions to solve the described problem:

  • Try to start the computer in Safe Mode, and select a restore point that was created before the problem started occurring.

  • If Windows Safe Mode doesn’t work, try booting the computer from Windows install disc and then run operations like, ‘Startup Repair’, ‘System Restore’, etc.

  • Try removing your hard drive and attach it as a slave to a working computer. If this works, you can salvage and backup all the data from Windows partitions. Alternatively, you can reinstall Windows and use your last data backup or a Windows Partition Recovery utility to extract lost data. You can Recover Windows Partition data by specialized utilities that can scan and restore all the lost or deleted files and folders.

Stellar Phoenix Windows Data Recovery is a feature-rich utility that recovers and restores lost data by running powerful, yet safe, scanning algorithms. This Windows Partition Recovery software is compatible with Windows 7, Vista, XP, 2003, and 2000. The software incorporates advanced recovery features like, disk cloning, disk imaging, RAW file recovery, and more.

About Author
Daisy a student of Mass Communication doing research on Partition recovery software. He is also a freelancer for http://www.partitionrecovery-software.com/window-ntfs-fat-recovery.php
Categories : Window Xp Repair
Comments Comments Off
Jun
11

Repairing Or Reinstalling Windows XP Cause Data Loss

Posted by: | Comments Comments Off

You might lose your critical data, which is stored in primary drive, after you repair or reinstall Microsoft Windows operating system. This problem occurs as you need to format the primary partition of your hard drive, when you reinstall Microsoft Windows operating system. In such cases, you need to restore data from the most recent backup to prevent grave situations. However, if the backup is not updated, Windows Recovery is required to extract lost data.

You may come across this behavior after you carry out any of the below actions of your computer, which has Microsoft Windows XP operating system pre-installed by an OEM (Original Equipment Manufacturer):

  • You reinstall the operating system in same directory using Upgrade (Recommended) option after running Winnt32.exe, or using Install Windows XP option on “Welcome to Microsoft Windows XP” screen. It is also called in-place installation or in-place upgrade.

  • You reinstall Windows XP by formatting the primary partition, which contains your applications, data, operating system, and program settings.

  • You repair the installation of Windows XP by booting your system from Windows XP boot CD, pressing Enter key to set up Microsoft Windows XP, and pressing R key to repair selected installation.

Cause

This problem may occur due to either of the following reasons:

  • The Undo_guimode.txt file is there in “System32″ folder of Windows hard drive. This file is created by a wizard, which runs when you boot your system that has pre-installed Microsoft Windows XP operating system.

  • Formatting the primary partition of your hard drive removes all of its contents. It removes MFT (Master File Table) or FAT (File Allocation Table) entries, which are required by the operating system to locate and access files.

Resolution

Try out the following things to fix the issue:

  • Install latest service pack of Microsoft Windows XP.

  • Restore data from backup.

However, if you do not have a backup or its not updated, Windows Data Recovery is required.

You can recover lost, missing, and inaccessible Windows data successfully using Windows Data Recovery Software. They work in all cases of data loss and retrieve data using powerful scanning algorithms. The Windows Partition Recovery tools let you perform recovery on your own as they have simple graphical user interface. The integrity of your data is preserved by these software due to their read-only and non-destructive conduct.

Stellar Phoenix Windows Data Recovery recovers lost files, folders, and partitions from Windows hard drive. The software supports recovery from NTFS5, NTFS, VFAT, FAT32, and FAT16 file system partitions. It works well with Microsoft Windows 7, Vista, 2003, XP, and 2000 operating systems.

Robin Watson PhotoAbout Author
The Author is a software analyst and doing research on data recovery software to recover windows files and also analyses how to perform windows hard drive recovery
Categories : Window Xp Repair
Comments Comments Off

Introduction

Undoubtedly, Windows 7 is one of the best operating systems from Microsoft, blessed with lots of feature, which have resulted in better performance and security over your computer than the previous versions. But to keep the momentum of your computer, it is essential that you are aware of some basis tips of Windows 7 repair. However, if you are not so proficient in computer, then no need to worry at all, because there are some recognized enterprises, who are offering Windows 7 repair services on remote basis, which means that you can avail these services at the comfort of your home and office or on move.

Features

Basically, every setting related guideline for your computer’s performance and security features are baked smartly into the Windows Registry. Windows 7 JumpList, Aero, HomeGroup and DirectAccess all are run form the background by Windows Registry, behind any problems on your computer directly or indirectly this is the only culprit. So, if you have a good command over Windows 7 Registry, you can tweak and play with it.

But its structure is somewhat critical, so it would be better to deploy Windows 7 Registry repair software, which are easy to use and execute for getting desirous result on your computer. Some general problems, like setting related with audio, video- graphic, keyboard, mouse, and Internet Explorer and e-mail clients can be easily solved at your own end, by using the Control Panel of your computer.

To repair your Windows 7 computer against sluggish performance, slow startup and slow booting you can perform, cleaning of hard disk memory, use the inbuilt utilities of Windows, such as, Disk Defragmenter and Disc Cleanup. These will remove unwanted and temporary file besides arranging your cluttered file in an organized manner to free more space on hard disk memory.

Don’t get disappointed, if your Windows 7 computer wants some critical repair service. You can call your remote tech support provider over the phone and get your Windows 7 computer repaired on real-time, as most of these work on 24/7 basis. You don’t have to do anything, just permit their technicians to take the remote control of your computer via safe Internet connection and sit relax. You would get your Windows 7 computer repaired in front of your eyes. They deploy advance technique to fix Windows 7 registry issues, besides optimizing your computer’s performance.

Usability

With the inbuilt features of Windows 7, you can get rid of frequent computer’s problems related with its performance. You can optimize it within a few minutes in an easy way. Windows 7 Registry repair software will remove unwanted registry entries created during installation and un-installation of programs, and remote tech services would ensure 100 percent real-time resolution for any critical issues.

Limitation

Windows 7 Registry is a complicated entity, so it can’t be touched and utilized in a better way by everyone.

Recommendation

Make yourself habitual of using Disk Defragmenter twice a month. Registry cleaner software too should be implemented for periodic scanning of Windows 7′s registry, but it should be well compatible, otherwise you can’t expect effectual result. You must equip your Windows 7 computer with compatible antivirus software, so that your system can combat with viruses and spyware in an effective way, which tends to harm your computer’s memory and Windows registry. For any Windows related problem, you can visit Microsoft Solution Center for getting free resolution on various issues.

Inbuilt Windows 7 repair utilities are good enough to keep your computer’s memory healthy, which is deeply associated with the performance of your computer. However, for critical issues, which are out of scope of Microsoft Solution Center, you should contact your tech support provider without any delay.

About Author
Ryan is a Microsoft Certified technician working at iYogi, a leading technical service provider for Windows 7. The Certified Technicians are dedicated to proper computer repair. iYogi also provides services like windows 7 repair.
Categories : Window Xp Repair
Comments Comments Off
Jun
11

Error Reading Windows XP NTBackup File

Posted by: | Comments Comments Off

Windows MS Backup (NTBackup.exe) utility simplifies the task of performing data backup that proves the best safeguard against any type of loss. Windows XP professional includes this utility by default in its installation, but for Windows XP, one needs to install it manually from Windows XP CD. This tool can backup all vital files and folders, system state data, and Windows registry settings on regular or frequent intervals of time in a proprietary format- BKF. But similar to all other files on a storage media, BKF is also equally vulnerable to corruption instances, such as media corruption, virus attack, unexpected power outage, and others. To overcome such problems, a bkf repair Tool can help.

To elaborate further, let’s consider a realistic instance that can occur to any user using NTBackup utility. A user takes regular data backup by MS Backup tool on an external hard drive running on a Windows XP computer. Then, the computer crashes and hedecides to restore from the BKF data stored on the external hard drive. But when he attaches the hard drive to a healthy computer and try to read the BKF file, he cannot do so. Additionally, the following error pops up:

“Portions of file_name.bkf cannot be read. The backed up data is corrupt or incomplete.”

Where, file_name refers to the name of BKF file created by NTBackup.exe tool.

Cause:
BKF file is corrupted.
In some cases, the issue can be system specific too.

Solution:
To isolate the issue, discussed above, you need to perform the below steps:
You can try to restore data from BKF file on another computer.
If BKF reports the same error on another computer also, the file is corrupted. For recovery, you are suggested to use a third-party repair bkf file utility.

A commercial BKF Repair Tool can analyze a corrupted BKF and restore its data in readable, BKF file. These applications are competent to perform BKF file repair using most effective set of algorithms and also, are safe to use. Moreover, the applications are usable in any case of BKF file corruption.

About Author
I am Laren Daniel, professional author writes articles for Software handing issues such as file corruption, application malfunction and provides information regarding best recovery softwares for bkf repair, ms backup tool, hard drive backup etc.
Categories : Window Xp Repair
Comments Comments Off